Play Station 4 (PS4) comes up with a great design and functionality; still, it has some flaws with its PS4 hdmi ports. The most common point in all the gaming consoles that can be subject to any breakage or any other fault, is the HDMI ports. In such cases, you have to follow up with the ps4 hdmi port repair. Then only you can access your gaming consoles. The main functionality of the hdmi ports is to connect your consoles with the TV so that you can play on a big screen.

You can repair the HDMI ports only if you have expert knowledge of them. You must be aware of the knowledge and skills of technical repairing. Without, any skill there is a high possibility, that you can further cause damage to the pins. 4 main pins are solder onto the motherboard, and 19 small pins require being solder on the motherboard. You must have knowledge corresponding to every pin.

Main Symptoms When You Need “ps4 hdmi port repair”

 There are chances when you come across some other issue in your consoles, and you take it as a bad port and go for its repair. That will not solve your problem. So, to figure out that your ports are in a bad situation and you need to perform ps4 hdmi port repair, you can check these points:

  • Check for any broken or bend pins in the HDMI port
  • The TV screen will show you an error that relates to HDMI ports.
  • The TV screen is displaying “No Signal”.
  • Check for any misplaced port, sometimes we apply more pressure while inserting the cable in the port due to which it bends and get crooked.
  • Your PS4 is ON and shows a white light, but you can not see anything on the TV screen. It also means that the HDMI ports of your gaming console are in any bad condition.

The permanent solution to these bad HDMI ports is the entire replacement of these ports. As repairing can be temporary in some cases like when your HDMI ports have pushed back, so you can repair these ports by pushing them again at their original position, but they can again get back and no longer work. While, in some cases, PS4 hdmi port repair can work well and solve your purpose permanently. So, first, configure the situation of your HDMI ports, and then decide whether to repair it or to replace it.

For tv related issues contact geek squad tv repair team.

What do I do if my HDMI port is not working on my PS4?

If you are configuring the issue, that your HDMI ports are not working, or your TV signal is showing blank, then at the very first step you have to check the main problem with the ports, then take the preventive action corresponding to it. Follow the steps below to perform the ps4 hdmi port repair:

  1. Check if there is any breakage in the pin of the HDMI ports, prefer to replace the ports. Repairing will not work in such a case.
  2. For repairing the PS4 port, you have to perform the steps below:
    1. First, take the motherboard, and strip the console in the downward direction.
    2. Now, configure the HDMI port that is not in a good state.
    3. Now, detach the HDMI port which you want to repair.
    4. There are four main ports called holding legs that are attached via holes. Handle it very safe as the HDMI small data pins are organized over it.
    5. Carefully remove the old port.
    6. After removing the old port successfully, check the solder pads of the motherboard. Check that all of them are in the correct state or not. There must not be even a single pad that is in a damaged condition.
    7. If there is any damage to it, then it can cause damage to the entire motherboard. Then, you have to replace the motherboard. So, carefully remove the damaged pad to avoid damage to the motherboard.
    8. Clean the board thoroughly.
    9. Now, place the new HDMI port to perform the ps4 hdmi port repair successfully.
    10. Now, reassemble the port.
    11. Perform the testing operation for a minimum of four hours.
    12. Check for the successful operation of the gaming console.

Is it worth fixing PS4 HDMI port?

Repairing the HDMI port may or may not be worthwhile fixing at home. If you perform the repairing of the port yourself without any skills and technical knowledge, then there is a high possibility that you end up with the damaged product. Also, you must be sure before following up with the ps4 hdmi port repair, that the ports are the main reason for the failure of the gaming console. There can be a problem with the other things of the console and not the ports. Repairing the ports in such a situation can lead to the failure of the play station working again.

Professional ps4 HDMI Port Repair is the best-preferred way to avoid any hassle and make it worthy. Professional repairing will provide the surety that your ports will be in the best possible situation after repairing.

Can you fix a broken HDMI port on a PS4?

The best thing you can do is to avoid any repair or replacement. It is possible only when you follow strict protocols to avoid any damage to the HDMI ports. Stick to these preventive measures to avoid any damage or breakage to PS4 HDMI Ports:

  • When you insert the HDMI Cable or unplugging the HDMI cable, make sure to turn OFF the gaming console first and then use the cable.
  • When your console is attached to the cable, do not try to move it around. It can stretch the cable, and damage the ports.
  • While the cables are plugged in, do not wrap the extra cable over the gaming console. It can also damage your HDMI ports, and you then need to perform the ps4 hdmi port repair.
  • Always try to use the HDMI cable that is as short as required.
  • Try to make the connection still all the time. Do not unplug and plug again and again after some time.  

Is you’re still facing issues with your ps4 hdmi then contact our geek squad ps4 repair team.

Categories: Geek squad services

0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Geek Tech

Call Now +1-805-303-2541